Newbie to Miniak editor

General discussions related to Miniak-editor
hnash53
Posts: 3
Joined: Fri Mar 02, 2012 8:53 pm

Newbie to Miniak editor

Post by hnash53 »

I just bought the Miniak editor, but am unable to control the synth through the editor.

I have the editor running on my laptop. I am using a Behringer USB/Audio interface into which I have R & L audio cables from the Miniak. Then I have RCA cables running out of the USB/Audio interface into my amplifier. The USB cable is connected to my laptop.

I am using Audacity as the recording software. It "sees" the USB/Audio codec and I can record whatever I play on the synth. The USB/Audio interface allows "audio" to come into my laptop, but not MIDI.... and I'm guessing that is the problem.

However, the Miniak editor isn't "seeing" the synth, because when I try to "request a patch", the message pops up saying "No Miniak available."

I'm guessing that I don't have any MIDI connections coming into my laptop. I am very unfamiliar with MIDI and don't know how/what to do at this point.

I want to be able to use the editor to tweak the patches/presets/programs (whatever you want to call them), adjust ADSR, etc. But at this point, the editor isn't seeing the Miniak... and I'm sure it's a MIDI thing.

So.... can someone help me out here? I'd really appreciate a reply... and one that considers that I am a newbie to MIDI.

Many thanks.

Hal
User avatar
Iman_JL
Posts: 47
Joined: Sun Jan 08, 2012 7:53 am

Re: Newbie to Miniak editor

Post by Iman_JL »

You need at least a MIDI interface with one input and one output port to get it working.
hnash53
Posts: 3
Joined: Fri Mar 02, 2012 8:53 pm

Re: Newbie to Miniak editor

Post by hnash53 »

I purchased a USB to MIDI interface cable. It has a USB at one end which plugs into my laptop. At the other end, are two male MIDI cables, one labelled OUT and the other IN. I plugged the USB into my laptop, and the MIDI ends into the Minak's MIDI OUT and IN ports.

I then opened up the Miniak Hypersynth Editor, and at the bottom of the screen selected the USB-MIDI for MIDI OUT and MIDI IN.

I still cannot use the Editor. I can't adjust any of the settings. When I try to "Request Patch," the message pops up "No Miniak Available."

The cable has two lights on it... one at the USB end, and a light at the MIDI end. The USB is lit up, but the MIDI light is not.

HELP HELP HELP!!!

If I can't get this to work, the Miniak is pretty much useless to me, so I'd really appreciate some intelligible replies to help me out.

Thanks.

Hal
hnash53
Posts: 3
Joined: Fri Mar 02, 2012 8:53 pm

Re: Newbie to Miniak editor

Post by hnash53 »

OK, well I've got "some control" now.

I can adjust some things using the editor now, but still, when I press "request patch" the message pops up saying "No Miniak available."

So, can anyone help me out to figure out how to be able to call up a patch from one of the MIDI banks?

Thanks again.

Hal
galneon
Posts: 2
Joined: Fri Mar 23, 2012 7:33 am

Re: Newbie to Miniak editor

Post by galneon »

You only have a one-way MIDI connection... I'm willing to bet one of your MIDI connectors is hooked up to the MIDI THRU of your synth.

Don't worry, everyone's done it before...
Lucifa
Posts: 4
Joined: Tue Apr 03, 2012 9:14 am

Re: Newbie to Miniak editor

Post by Lucifa »

I'm also having the same issue with regards to "No Miniak available." My MIDI cables are set up correctly.

It works sporadically, but I seem to have little control over when it'll receive a patch and when not.

Is there an idiots guide to sending patches? A step-by-step walkthrough of how the process is done, maybe I'm missing something.

I've managed to send and edit patches with the editor, so I imagine everything is at least set-up right.

Appreciate any help, cheers.
User avatar
Iman_JL
Posts: 47
Joined: Sun Jan 08, 2012 7:53 am

Re: Newbie to Miniak editor

Post by Iman_JL »

It works sporadically, but I seem to have little control over when it'll receive a patch and when not.
Try with a different MIDI interface.
Is there an idiots guide to sending patches? A step-by-step walkthrough of how the process is done, maybe I'm missing something.
We are building a new manual it will be published with upcoming release v2.2. For now if you need more detailed info and step by step tutorials please refer to the new ion-editor manual and follow the instructions in Micron mode:

http://www.hypersynth.com/download/ion- ... l_rev6.pdf
Lucifa
Posts: 4
Joined: Tue Apr 03, 2012 9:14 am

Re: Newbie to Miniak editor

Post by Lucifa »

Iman_JL wrote:
It works sporadically, but I seem to have little control over when it'll receive a patch and when not.
Try with a different MIDI interface.
Is there an idiots guide to sending patches? A step-by-step walkthrough of how the process is done, maybe I'm missing something.
We are building a new manual it will be published with upcoming release v2.2. For now if you need more detailed info and step by step tutorials please refer to the new ion-editor manual and follow the instructions in Micron mode:

http://www.hypersynth.com/download/ion- ... l_rev6.pdf
Thanks, that guide is what I was after.

Unfortunately I'm not able to afford a new interface. Although the one I have is second hand so I'm not writing it off as being the issue.

Cheers
Lucifa
Posts: 4
Joined: Tue Apr 03, 2012 9:14 am

Re: Newbie to Miniak editor

Post by Lucifa »

Now I'm really confused. The Miniak responds appropriately when using the external mod wheels on the editor (pitch up/down), and there's definite MIDI out signal on my interface when i try to save a patch, but it's just not recognising it.

I have a few other MIDI devices, and my Miniak is assigned to MIDI port 3 (IN) and 4 (OUT). Could this be an issue?
User avatar
Iman_JL
Posts: 47
Joined: Sun Jan 08, 2012 7:53 am

Re: Newbie to Miniak editor

Post by Iman_JL »

It can be your MIDI interface that filters out or rejects some parts of the MIDI message, I know that the MOTU interfaces has a serious problem with Miniak sysex messages but it transmits NRPN and CC properly. What is your interface Model and brand?
I have a few other MIDI devices, and my Miniak is assigned to MIDI port 3 (IN) and 4 (OUT). Could this be an issue?
seems normal.
Post Reply